Herunterladen Diese Seite drucken

Remote Control - AEG DCK0250HG Benutzerinformation

Vorschau ausblenden Andere Handbücher für DCK0250HG:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 55
34
www.aeg.com
It is recommended to leave
the hood operating for
approximately 15 minutes
after cooking.
To operate the hood:
1. Press the first speed button
switch on the appliance.
2. If needed, press the light button
illuminate the cooking surface. The
light is dimmable. Press again the
button to change the intensity from:
a. Maximum,
b. Medium,
c. Low,
d. Off.
3. If needed, change the speed by
pressing the desired button.
To turn off the appliance press the first
speed button
3.2 Hob²Hood function
It is an automatic function which
connects the hob with a hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is
defined automatically on basis of mode
setting and temperature of the hottest
cookware on the hob. You can also
operate the fan using the hob manually.
The function can be activated from panel
of the hob.
For more information how to
use the function refer to the
hob user manual.
3.3 Filter notification
Filter alarm reminds to change or clean
the charcoal filter and clean the grease
to
again.
filter. The filter indicator
for 30 seconds if the grease filter must
be cleaned. The filter indicator
for 30 seconds if the charcoal filter must
be replaced or cleaned.
Refer to cleaning the grease
filter in care and cleaning
chapter.
to
Refer to cleaning the
charcoal filter or replacing
the charcoal filter in care and
cleaning chapter.
To activate or deactivate function:
1. To activate function press the button
for 3 seconds.
If the function is activated, the filter
indicator
flashes two times.
2. To deactivate function press the
button
If the function is deactivated, the filter
indicator
flashes ones.
To reset the function press the button
for 3 seconds.
3.4 Remote-control
The appliance is supplied with a remote-
control.
The connection is originally enabled.
To connect or disconnect remote-
control:
1. Switch off the appliance.
2. Press the
The indicator on control panel flashes
twice if function is enabled and once if
disabled.
is turned on
flashes
for 3 seconds.
for 3 seconds.

Quicklinks ausblenden:

Werbung

loading

Diese Anleitung auch für:

Dck5281hgDce5260hmDce5960hmDck5280hg