METREL MD 9930 Benutzerhandbuch Seite 29

METREL MD 9930
PC Camera
The device is controlled over USB by your computer. If this mode is selected, the
following image will be displayed:
HDMI Output
The video output from the thermal camera enables displaying the thermal image (not
including the operator menus) on an external monitor or video recording device
capable of managing HDMI systems.
To make HDMI connection:
 Connect the thermal camera to the external HDMI monitor or recording device
using the included HDMI video cable.
 Turn on the external HDMI monitor or device.
 Power on the thermal camera.
 With the image displayed on the external HDMI monitor or device, the thermal
camera's display works simultaneously.
 Once the operations on the external device are finished, switch off the extern
device and disconnect the HDMI video cable from the thermal camera.
29
Settings Menu