METREL MD 9930 Benutzerhandbuch Seite 16

METREL MD 9930
accurately. In most cases, the reflected temperature is the same as the ambient of
the measured object.
Reflections have very little effect on object with high emissivity and can be ignored.
To measure the reflected temperature (or background temperature):
1. Set the emissivity to maximum (0.95).
2. Set the focus to near range.
3. Face away from the object under test and point camera to any high emissivity
object.
4. Take the measurement of the scene. Imager automatically takes central,
highest and lowest temperatures.
5. Calculate the average temperature of the background scene.
6. Insert it as Reflected Temperature parameter in the Settings Menu.
Metrel IR Analyser
Thermal camera reporter software Metrel IR Analyser is available online at Metrel
webpage. This software is intended for thermal camera and for analysing images,
organizing data and information, and making professional reports. Thermal camera
reporter software allows audio annotations and commentary to be reviewed on a PC.
Temperature Measurement
16