Quick Start Guide; Intended Use; Safety Instructions - nedis ACMB1WT7 Kurzanleitung

a

Quick start guide

Mobile air conditioner
For more information see the extended manual
online: ned.is/acmb1wt7

Intended use

The Nedis ACMB1WT7 is a mobile air conditioner used for cooling
and dehumidifying rooms.
This product can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the product in a safe
way and understand the hazards involved. Children shall not play
with the product. Cleaning and user maintenance shall not be done
by children without supervision.
This product is intended for use in household environments for
typical housekeeping functions that may also be used by non-expert
users for typical housekeeping functions, such as: shops, offices
other similar working environments, farm houses, by clients in
hotels, motels and other residential type environments and/or in
bed and breakfast type environments.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Specifications
Product
Article number
Dimensions
Weight
Input voltage
Required power
Energy class
Energy efficiency ratio (EER)
Noise level
Cooling capacity
Room size capacity
Air circulation
Dehumidification
Refrigerant
Power plug
Main parts (image A)
1
Control panel
2
Swing louvers
3
Handle
4
Exhaust nozzle
5
Exhaust hose
6
Window kit
7
Window kit adjustment
screws

Safety instructions

WARNING
-
Contains one or more (extremely/highly)
flammable components.
ACMB1WT7
Mobile air conditioner
ACMB1WT7
320 x 370 x 730 mm
21 kg
AC 220 - 240 V ~ 50-60 Hz
792 W
A
2.6
≤ 65 dB
7000 BTU
45 m
3
300 m /h
3
20 l/day
R290 / 130 g
Schuko CEE 7/7
8
Continuous drainage outlet
9
Air outlet
10
Manual drainage outlet
11
Power cable
12
Exhaust hose connector
13
Remote control
14
Exhaust nozzle screw
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep this
document for future reference.
•
Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace
a damaged or defective product immediately.
•
Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
•
If the product is immersed in water, do not touch the product or
the water.
•
After the product has been immersed or covered in water or
other liquids, do not use the product again.
• Make sure that the electrical supply in your area matches a
voltage of 220 – 240 VAC and a frequency of 50 Hz.
• Connect to a grounded socket only.
•
If necessary, use an earthed extension cable of a suitable
diameter.
• Fully extend the power cord and make sure the power cord does
not contact the product.
• When using an extension cord, use one which is as short as
possible and fully extended.
• Do not use external timers or remote control systems to switch
the product on or off.
•
Ensure people do not trip over the cord.
• Make sure that the power cable cannot become entangled and
does not hang over the edge of a worktop.
• Do not leave the product unattended when switched on.
•
Keep the product away from heat sources. Do not place the
product on hot surfaces or near open flames.
•
Place the product in an area without any continuous sources of
ignition (for example: open flames, gas or electrical appliances in
operation).
•
Only install, operate and store the product in a room with a floor
area above 7 m .
2
• Switch off the main power switch before unplugging the power
cord.
• Disconnect the product from the power source before service
and when replacing parts.
• Disconnect the product from the power outlet and other
equipment if problems occur.
•
Always disconnect the product from the power outlet when
cleaning or moving the product.
•
Do not pull the power cable to move the product.
• Shut off the main power grid and carefully remove the plug from
the power outlet.
• Close supervision is necessary when the product is used by or
near children, animals or infirm persons. Do not allow children to
play with it or touch it.
• Do not insert any objects into the product.
•
Do not obstruct or cover the product's air inlet or outlet grid.
• R290 is a refrigerant gas that complies with the European
directives on the environment.
• Be aware that refrigerants can be odorless.
• Store the product in such a way as to prevent mechanical failure.
•
Only store the product in a well-ventilated area.
• When the product is installed, operated or stored in a
non-ventilated area, make sure the room is designed to prevent
the accumulation of refrigerant leaks resulting in a risk of fire or
explosion due to ignition of the refrigerant caused by electric
heaters, stoves, or other sources of ignition.
• Only persons with a current valid certificate from an
industry-accredited assessment authority, which authorizes their
competence to handle refrigerants safely in accordance with an
industry recognized assessment specification, can work on or
break into a refrigerant circuit.
6