Programming; Dim Levels & Runtimes - Lupine Piko R Bedienungsanleitung

Programming

Light Levels:
By default, the Piko R operates in the 3-step mode, several other light programs are available.
They are very easy to select by simply keeping the button pressed until the button's red LED (blue LED)
flashes once, twice, etc. When taking your finger off the button accordingly, the setting will be saved.
Available Press the button
Adjustments until it lights
2 - Step 1x red
3 - Step 2x red
4 - Step 3x red
3 - Step (RVLR) 4x red
3 - Step (ECO) 5x red
start in lowest beam 1x blue
start with highest beam 2x blue
3x blue
early "battery low warning"
late "battery low warning" 4x blue
Alpine SOS 5x blue
SOS 6x blue
Bluetooth Connecting Mode 1x green (after 14 sec)
Example:
To get into 4-step
then release the button.
22 Piko R
Default setting
(after 3 sec)
(after 4 sec)
(after 5 sec)
(after 6 sec)
(after 7 sec)
(after 8 sec)
(after 9 sec)
(after 10 sec)
(after 11 sec)
(after 12 sec)
(after 13 sec)
mode, hold the button until the red LED flashed 3 times,
Output
Piko R 4/X 4
15 W 1500 lm
2-Step
1.2 W 150 lm
15 W 1500 lm
3-Step
5 W 550 lm
0.3 W 40 lm
15 W 1500 lm
7 W 750 lm
4-Step
2.5 W 300 lm
0.3 W 40 lm
15 W 1500 lm
3-Step
5 W 550 lm
with RVLR
RVLR
3-Step
7 W 750 lm
Eco
2.5 W 300 lm
0.3 W 40 lm
Runtime varies according to battery age, and condition, as well as ambient temperature.
RVLR:
This mode includes an additional slow flash mode.
SOS /ALPINE SOS: If one of these modes is activated the switch will glow pink and the light will
continue with SOS until the battery is empty.
Note: The SOS sign is an emergency signal!
Dim Levels and Runtimes
Runtime Runtime Runtime
Piko R 7/X 7 Piko RX Duo
1:45 h
3:30 h
20 h
40 h
1:45 h 3:30 h
5:30 h
5 h 10 h
80 h
160 h
1:45 h 3:30 h
3:30 h 7 h
10 h 20 h
80 h 160 h
1:45 h 3:30 h
5 h 10 h 5:30 h
RVLR
RVLR RVLR
3:30 h 7 h
10 h 20 h
80 h 160 h
Misuse may be prosecuted!
2 h
25 h
2 h
95 h
2 h
4 h
11 h
95 h
2 h
4 h
11 h
95 h
Piko R 23