Symbol WSS 1000 Kurzübersicht Seite 11

2. Insert the ring scanner in the ring mount, depending
3. Plug the cable connector from the WWC 1000 in the
Downloaded from www.Manualslib.com
on right- or left-handed use.
a. Determine whether the scanner will be used on
the right or left arm.
b. Orient the ring scanner to the mount so that the
trigger is next to the operator's thumb.
c. Slide the ring scanner backwards into the mount.
interface port on the back of the ring scanner, with
the arrow on the top of the cable facing up.
manuals search engine
9