Connecting A Microphone/Guitar; Party Light; Adjust Volume Level And Sound Effect - auna Ghettoblaster Soundstorm Handbuch

5. During play mode, when
audible high-speed backward or forward playback.
6. Press and hold EQ/FD button will advance to the next folder.
Remark: you can also use hplay light APP to control USB playback.
Using a microphone or a guitar, you can mix its sound with a source sound.
CAUTION:
DO NOT connect a bass guitar to the MICROPHONE / GUITAR INPUT JACK, as it may damage the speaker.
1. Turn the MICROPHONE INPUT LEVEL CONTROL fully counterwise.
2. Connect a microphone or a guitar to the MICROPHONE / GUITAR INPUT JACK of the speaker.
3. Select the Bluetooth, Aux in, FM radio or USB as the source.
4. Start playback of the sound source.
5. Turn the MICROPHONE INPUT LEVEL CONTROL to adjust the microphone volume.
6. Turn the GUITAR OUTPUT LEVEL CONTROL of your guitar to adjust the guitar volume.
Press LIGHT button to turn on/off the party light.
To adjust the volume
Turn the VOLUME LEVEL CONTROL to adjust the volume of the speaker.
Control the echo
Turn the ECHO LEVEL CONTROL to adjust the echo effect.
Control the EQ
Press the EQ/FD button, the sound tone changes as below:
Downloaded from www.Manualslib.com
/ - or

Connecting a microphone/guitar

Adjust volume level and sound effect

manuals search engine
/ + button is pressed and held, it will search the track with

Party Light

16