Bluetooth Function - auna Ghettoblaster Soundstorm Handbuch

Pair the BT device
Before using your speaker with a Bluetooth device for the first time, you must pair and connect it to the
Bluetooth device. Press the POWER SWITCH to turn on the speaker, then press the MODE button to
select the Bluetooth mode . The BLUETOOTH INDICATOR starts to flash, and the speaker is now in pairing mode.
Pair the speaker using NFC
1. With Near Field Communication (NFC), you can easily pair and connect the speaker to Android
device with NFC.
2. If the Android device supports NFC, activate its NFC feature, and touch the NFC area of the
speaker with the NFC area of your Android device. The speaker pairs and connects to the Android
device automatically. For details on NFC, see the user guide of the Android device.
3. For other Bluetooth device, pair the speaker manually.
Pair the speaker manually
1. Verify that the Bluetooth function of Bluetooth device is enabled.
2. Choose the Bluetooth menu in your Bluetooth device, and from the found devices, select the
"Soundstorm". If you are prompted to enter the PIN code, please enter „0000" (four zeros).
3. For more information, see the user manual of Bluetooth device.
4. After a successful pairing, play the music from the Bluetooth device.
Downloaded from www.Manualslib.com

Bluetooth function

manuals search engine
14