Safety Notes; Product Description And Specifications - Bosch GAM Professional 220 Originalbetriebsanleitung

OBJ_BUCH-2368-003.book Page 13 Thursday, February 18, 2016 12:13 PM
Entsorgung
Messwerkzeuge, Zubehör und Verpackungen sollen einer umweltgerechten
Wiederverwertung zugeführt werden.
Werfen Sie Messwerkzeuge und Akkus/Batterien nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der europäischen Richtlinie 2012/19/EU müssen
nicht mehr gebrauchsfähige Messwerkzeuge und gemäß
der europäischen Richtlinie 2006/66/EG müssen defekte
oder verbrauchte Akkus/Batterien getrennt gesammelt
und einer umweltgerechten Wiederverwendung zugeführt
werden.
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt abgegeben
werden bei:
Deutschland
Recyclingzentrum Elektrowerkzeuge
Osteroder Landstraße 3
37589 Kalefeld
Schweiz
Batrec AG
3752 Wimmis BE
Änderungen vorbehalten.
English

Safety Notes

Read and observe all instructions. The integrated protec-
tions in the measuring tool may be compromised if the meas-
uring tool is not used in accordance with the instructions pro-
vided. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
 Have the measuring tool repaired only through qualified specialists
using original spare parts. This ensures that the safety of the measuring
tool is maintained.
 Do not operate the measuring tool in explosive environments, such as
in the presence of flammable liquids, gases or dusts. Sparks can be
created in the measuring tool which may ignite the dust or fumes.
 When using the angle information provided by this tool to cut work-
pieces, always strictly observe the safety and working instructions of
the saw being used, including those for positioning and clamping the
workpiece. When the required angles can not be set on a certain saw or
saw type, alternative sawing methods will need to be applied. Extremely
acute (sharp) angles can be cut using a taper jig with a table saw or a cir-
cular saw.

Product Description and Specifications

Please unfold the fold-out page with the representation of the measuring tool
and leave it unfolded while reading the operating instructions.
Intended Use
GAM 220: The measuring tool is intended for measuring and transferring an-
gles (horizontal and vertical), e.g. for customisations in interior fitting work,
in staircase construction or on exterior panelling. It is suitable for indoor and
outdoor use.
GAM 220 MF: The measuring tool is intended for measuring and transferring
angles and for calculating simple and compound mitre angles. It is suitable
for indoor and outdoor use.
Product Features
The numbering of the product features shown refers to the illustration of the
measuring tool on the graphic page.
1 Fold-out leg
2 Viewing window for display
3 Locking wheel
4 Base leg
5 Battery lid
6 Latch of battery lid
7 Display
8 Spirit level for horizontal alignment
9 Spirit level for vertical alignment
10 Serial number
11 "HOLD" button
12 "ON/OFF" button
13 Button for rotating the display
14 "MTR1" button for simple mitre (GAM 220 MF)
15 "MTR2" button for compound mitre (GAM 220 MF)
16 Protective pouch
17 Leg extension
Bosch Power Tools
English | 13
1 609 92A 25A | (18.2.16)