WIKA PG43SA-S Betriebsanleitung Seite 8

4. Transport, packaging and storage
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging, especially the diaphragm protection (if avail-
EN
able). This will provide optimum protection during transport (e.g.
cleaning, change in installation site, sending for repair).
Permissible conditions at the place of storage
Storage temperature: -20 ... +70 °C
Protect the pressure gauge from dust.
8
Downloaded from www.Manualslib.com
CAUTION!
Damage to the diaphragm during unpacking
With improper unpacking, a high level of damage to
property can occur.
Avoid touching the diaphragm after removing the
diaphragm protection. Impermissible mechanical loading
(e.g. pressing the diaphragm) can result in measuring
deviations or even in the complete failure of the measur-
ing instrument.
The PG43SA-C is optionally packed under sterile
conditions, and on the perforation on the rear of the
sterile packaging there is a brown-coloured process
indicator. By checking this brown colouration you can
find out whether the gauge has been packed under
sterile conditions.
Store instruments that are packed under sterile
conditions in the instrument package (no condensation
allowed, storing possible for 6 months).
WIKA operating instructions pressure gauge, PG43SA-S, PG43SA-C
manuals search engine