Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To set the scale press SET button. There are 7 available scales:
1.
Concrete (0-6% H
2.
Cement Screed (0-6% H
3.
Cement Screed (0-4% CM)
4.
Anhydrite Screed (0-3.5% H
5.
Anhydrite Screed (0-1.9% CM)
6.
Caisson 0.3-15.3 Scale (0.3-15.3 m)
7.
Relative Scale (0-100%)
Name of chosen scale will appear in the scale indicator field.To see detailed description of each scale
go to Available scales section.
•
To set the mode of measurement press ON/HOLD button. There are 2 available modes:
Normal, Max Hold
The display color will change depending on which mode was chosen. To see detailed description
of each mode go to Modes & functions section.
•
To make a measurement press the meter against the tested surface until all spring electrodes
are completely blocked.
Caution: Do not press the device too intensely as this may harm the electrodes.
Caution: Fingers SHOULD NOT touch the sensor plate and electrodes while measuring. The meter
should be held in the middle while measuring.
O)
2
O)
2
O)
2
PCE Deutschland GmbH
D-59872 Meschede | Im Langel 4
Tel: +49 (0)2903-97699-0 | Fax: +49 (0)2903-97699-29
www.pce-instruments.com
spring electrode
electric field
Werbung
