Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. General function
PCE-PMI 4 meter calculates humidity of analyzed material by measuring its electrical impedance. The
relation between humidity of certain material and its impedance is directly proportional. Impedance
is measured through generating low frequency electric field between electrodes. The meter measures
low intensity alternating current flowing through electric field and on that basis calculates moisture
of tested material.
2. Constraints
Concrete Moisture Meter PCE-PMI 4 does not detect concrete humidity through electricity conducting
materials like metal coverings/ linings, PE-rubber or any wet surfaces.
Moisture Meter PCE-PMI 4 should not be used to measure concrete humidity on surfaces which are
topped with a thick layer of floor covering material like wood. Meter measurement outcomes show the
actual humidity at a time of measurement.
battery status
ON/HOLD
button
To turn on the meter press ON/HOLD button.
scale
indicator
SET button
PCE Deutschland GmbH
D-59872 Meschede | Im Langel 4
Tel: +49 (0)2903-97699-0 | Fax: +49 (0)2903-97699-29
www.pce-instruments.com
spring electrode
sensor plate
Werbung
