Pulsar Helion Bedienungsanleitung Seite 9

Menu contents and description
Wi-Fi
Wi-Fi ON/OFF
Turn Wi-Fi on with a short press of the M (9) button.
Off
Turn Wi-Fi off with a short press of the M (9) button.
Off
You can also turn Wi-Fi on/off with a long press of
the UP (10) button during operation.
Selection of operating mode.
Mode There are three automatic operating modes:
Each mode includes optimal combination of
parameters (brightness, contrast, gain etc.) to
deliver best possible image in specific viewing
conditions.
Enhanced contrast mode.
Rocks
Perfect for viewing animals against the background
of rocks, ground in mountain areas.
Low contrast mode
Forest
Perfect for viewing animals against a background of
vegetation.
Universal mode for various modes of observation.
Identification
Selection of colour palettes.
Basic image mode is "White Hot". Menu option
Color palettes
"Colour palettes" allows you to select an
alternative palette.
Enter the main menu with a long press of the M (9)
=
button.
Enter the submenu with a short press of the M
=
button.
Select one of the palettes below with a short press
=
of the UP (10)/ DOWN (8) buttons.
Confirm selection with a short press of the M
=
button.
Black Hot palette (white colour corresponds to
low temperature, black colour – to high
temperature)
Hot Red
Red Monochrome
Rainbow
Ultramarine
Violet
Sepia
11
Switch between the palette selected in the menu
and the basic palette with a short press of the UP
(10) button.
Selection of calibration mode. There are three
calibration modes: manual (M), semi-automatic
(SA) and automatic (А).
Calibration
Enter the main menu with a long press of the M
=
button.
Enter the submenu with a short press of the M
=
button.
Select one of the below calibration modes with
=
UP (10)/ DOWN (8) buttons.
Confirm selection with a short press of the M
=
button.
A In automatic mode the need for calibration is based
on software algorithm. Calibration starts
automatically.
SA The user determines for himself the need for
calibration based on the actual image status.
M Manual (silent) calibration.
Close the lens cover before calibration.
Wi-Fi setup.
This menu option allows you to set up your device
WiFi settings
for operation in a Wi-Fi network.
This menu option allows you to set a password to
Password
access your thermal imager from an external
setup
device.
12345
The password is used to connect an external device
(i.e. smartphone) to your thermal imager.
Enter the submenu "Wi-Fi" with a short press of
=
the M (9) button.
The default password "12345" appears on the
=
display.
Set the desired password with the UP (10) and
=
DOWN (8) buttons (button UP to increase value;
button DOWN to reduce). Switch between digits
with a short press of the M button.
Save the password and exit the submenu with a
=
long press of the M button.
Access
Access level setup
level setup
This menu option allows you to set required access
level of the Stream Vision application to your
Owner
device.
Guest
12