Solving Problems - Gastroback 42580 Bedienungsanleitung

SOLVING PROBLEMS

If any problems occur during operation, you will find solutions in this section. Further
information on processing your food is given in section Tips for Best Results.
Problem
You cannot insert the control
unit completely.
You cannot insert the oil contai-
ner properly.
You cannot close the lid.
The centrifuge does not work.
The basket cannot be locked in
the upper position.
Reason
The control unit is tilted a little.
The oil container is in wrong
orientation.
The container release slider is
locked.
The coupling of the centrifuge is
positioned somewhat unfavou-
rable.
The container release slider is
not closed.
The hinges of the lid are not
engaged properly.
The centrifuge will only work
with the lid closed properly.
The basket must be locked in the
upper position.
The basket is not mounted cor-
rectly.
The Solution
Lift the control unit a little, then try
again.
The oil container can only be inserted in
one orientation. Hold the oil container
with the MIN/MAX filling level marks
facing to the back of the appliance. Turn
the oil container a little back and forth.
Push the container release slider to the
right.
Turn the oil container a little back and
forth, until it slips onto the coupling.
Push the container release slider to the
oil container.
Ensure that both hinges are inserted in
the respective opening of the housing.
Press down the hinges until they engage.
Close the lid.
Lift and lock the basket to the upper
position.
Take out the basket and insert it again.
Doing so, ensure that you insert the black
handle of the basket into the guide of
the control unit.
57