Display Warnings; Red Warning Lamp - Nedap MPC-2 Bedienungsanleitung

English
MPC-2
Downloaded from www.Manualslib.com

6.3 Display warnings

After identifying a cow, the display will show a warning in the following cases:
Colostrum milk
COLOST
Milk separation
SEPMLK
Dry cow
DRY
Conductivity
CON ATT
During warnings the display will switch between indicating the above warnings
and the cow number and milk yield.

6.4 Red warning lamp

The red warning lamp has the following meaning, depending in the milking
phase:
Caution: When the red warning lamp is on, always check if one or more
warning LED s are on and press the corresponding animal information function
keys for which the warning(s) occur.
Warning from cow identification until end of neutral time
Warning lamp
Flashing 2x per second
On
Warning during milking
Warning lamp
On
Warning after cluster removal, until next cow is identified
Warning lamp
Flashing 4x per second
On
manuals search engine
Warning
No cow present /recognised
Conductivity warning in previous
milking
Colostrum
Separate milk
Dry cow
Warning
Separate milk
Conductivity warning, lamp on until
next cow is identified
Warning
Milk yield lower than expected, lamp
on until next cow is identified.
Separate milk
32