Information And Warnings; Animal Information Function Keys - Nedap MPC-2 Bedienungsanleitung

MPC-2
Downloaded from www.Manualslib.com

6. Information and warnings

6.1 Animal information function keys

If you wish to consult information concerning the identified cow, press the
animal information function key, the first item of the particular function key will
be listed. Pressing the same function key again will show the next listed item.
Five seconds after the last key stroke, the display will return to displaying the
cow number and milk yield.
The items that are changeable are listed below in italic and underscored.
Cow items
Activity deviation percentage
ACT
First field; separation function number (e.g. separation door No.)
COWSEP
Second field; number of separations
Group number
GROUP
Responder number
RESP
Feed items
Actual feed amount to be fed in milking parlour, also used to
ACTFDM
dispense extra feed in the milking parlour
Total amount to be fed in milking parlour as calculated by PC
FDMILK
Total feed amount of all five types of feed
FD TOT
Actual feed amount (balance) of all five types of feed, excluding
FD BAL
milking parlour
Feed calibration, enter number of portions
FD CAL
Milk items
Number of times the milk has to be separated, including current
SEPMLK
milking
Expected minimum milk yield (milk test value)
MILKT
Colostrum, yes/no
COLOST
Total milking time, from cluster attachment to removal
TIME
Maximum milk speed
MAXSP
Average milk speed
AVRSP
Actual milk speed
MLKSP
Disease items
Difference in percentage conductivity compared with the average
CON
Actual conductivity
A CON
RF - LF First field; difference in percentage conductivity
in the previous milking (RF, RR, LR, LF)
Second field; difference in percentage conductivity in the current
milking (RF, RR, LR, LF)
manuals search engine
29
English