Herunterladen Inhalt Inhalt Diese Seite drucken

Low Water Level; Technical Data; Filter Replacement - Livington Arctic Air Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für Arctic Air:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
the control switch You have a choice of three
modes - LO, MED and HI (low, medium and
high) The display lights beside the switch will
show you at which speed the Livington Arctic
Air is currently operating (see illustration 5)
3 Select the light colour by pressing
the control switch You have the choice of
continual colours or colour-changing mode
(see illustration 6)
COLOUR SEQUENCE: Blue, red, white, blue-
green, purple, yellow, green
Click all colours once to get to the colour
change mode Click again to turn off the colour
completely
4 To switch off press the on/off switch again
NOTE: If you plan to not use the Arctic Air for a
long period of time, leave the unit to run with
an empty water tank at the highest setting for
at least 5 minutes, so that the filter can dry out
LOW WATER LEVEL: If the water level is low, the
tank will blink three times, every 60 seconds in
the colour YELLOW When the tank is refilled, the
light will illuminate again as normal
MAINTENANCE:
Before cleaning, disconnect the appliance from
the power supply We recommend cleaning
the interior of the water tank and the appliance
once a week Use a non-abrasive cloth and, if
necessary, a mild detergent To achieve the best
results, we recommend replacing the filter every
6 months

FILTER REPLACEMENT:

The water filter should be replaced every 6
months or when you get the impression that your
Livington Arctic Air is no longer functioning as
it should The water tank lights up in YELLOW
until a filter is inserted again To do this, keep the
ventilator speed regulator and the light switch
pressed down for 3 seconds until the tank no
longer lights up in YELLOW To order the filter,
please contact our customer service You will
find the contact details on the last page of the
instruction manual
1 Disconnect the Livington Arctic Air from the
power supply
10
2 Lightly press the unlocking device below
the front air outlet and pull off the air outlet
downwards Put it beside (see illustration 7)
3 Carefully pull the filter out of the
appliance (see illustration 8)
4 Insert the new filter in the Livington
Arctic Air, by following the markings on the
filter (see illustration 9)
5 Insert the top plug of the front air outlet
in the opening and snap the locking device
securely back into place (see illustration 10)
FOR HOME USE ONLY

TECHNICAL DATA:

Model Number: 17013-G
Product Capacity Level: 5V DC 1,5A - 2,0A
Safety Class II
Safety Class III
This product complies with European
guidelines
Environmental Guidelines
Do not dispose of the product at the end
of its lifespan with the normal household
refuse Take it to a collection point for
the recycling of electric and electronic
appliances This is identifiable by the symbol on
the product, in the instruction manual and on the
packaging Find out about collection points that
are operated by your retailer or local authority
The reuse and recycling of old appliances is an
important contribution to the protection of our
environment
Only to be used in interior spaces
Please read these instructions
Made in China

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis