Eco Function - Braun CareStyle 5 Gebrauchsanweisung

shot button (12) while moving the iron from top to
the bottom.
• Steam is very hot: never iron or dampen
garment while wearing them.
• 3D soleplate: The unique round shape of the 3D
soleplate ensures best gliding results on difficult
parts (e. g. buttons, pockets etc.)
Note:
When starting the ironing session or when you have
not used the steam function for some time, the
steam still present in the supply hose will condense
into water. This may cause some spluttering in the
appliance and a few drops of water may come out
from the soleplate.

ECO Function

• For ironing with lower steam press the ECO
button (3) and the icon
on.
• Lower steam is suggested for most delicate
garments like silk, wool and synthetics.
• Note: the 2nd time the ironing system is switched
on, it will be set to the last steam mode, which
may be the ECO mode. To return to the normal
steam function press the ECO button again.
(C) Precision shot
• Press the precision shot button (12) completely
down to activate it, steam will come out of the tip
area of the soleplate only.
• To stop this function just release the button (12).
• If you don't press it down completely, some
steam may also come out from the rear steam
holes in the soleplate.
(D) Iron Auto-Off
When the iron is in the auto-off mode, the icon
flashing and the temperature control light (11) is off.
The iron will turn off to reduce power consumption.
It is activated, if after 10 minutes:
• there has been no steam emission.
• the icon is activated and water tank is not
refilled.
To turn the iron on again, the On/Off (2) button has
to be pressed. Before starting ironing again, wait
until the temperature control light (11) is
continuously on.
turns permanently
is
After ironing / storage
• Press the On/Off button to turn off the appliance (2).
• Unplug and let the appliance cool down before
storing.
• Empty the water tank.
• For models with lock system, lock the iron.
(E) Descaling
To maintain optimum performance, the system
needs to be decalcified after every 15 litres of water
consumption (about 10 complete refills). The icon
is blinking.
• First unplug the appliance. Wait until the
appliance has cooled down completely.
• Empty the water tank.
• Remove the iron from the base (if applicable
unlock the iron).
• Unscrew the transparent cover (8) positioned on
the ironing system and unscrew the closure (9).
• Pour in 500 ml tap water.
• Screw the closure to close the ironing system.
• Shake the ironing system to rinse, then empty the
water.
• Repeat this procedure one more time.
• After having finished the cleaning procedure,
plug in, switch on the ironing system (2) and
press the calc clean system button (4) for 2
seconds to reset.
If the appliance is switched off without cleaning, the
icon will start to flash again when it is next
switched on.
(F) Care and Cleaning
• Before cleaning, always make sure that the
appliance is unplugged and has cooled down.
• Wipe the soleplate clean with a cloth.
• Never use scouring pads, vinegar or other
chemicals.
• To clean the soft material on the handle use a
damp cloth.
11