Weather Forecast - Hama Black Line Bedienungsanleitung

• Day
• Hour
• Minute
• 12-/24-h format
• Time zone
• °C and °F
• Language
• To select the individual values, press the
or the button (C), and confirm each selection by
pressing the MODE button (A).
• Press the MODE button (A) immediately to adopt the
set value displayed and skip ahead.
• If you do not make an entry for 20 seconds, Settings
mode is exited automatically.
Note – Time zone
• The DCF signal can be received over long distances,
but always transmits the current Central European
Time in Germany. Make sure you account for the time
difference in countries with another time zone.
• If you are in Moscow, the time is 3 hours later than in
Germany. This means that you should set +3 for the
time zone. The clock then automatically sets the time
to 3 hours after the DCF signal received or relative to
the manually set time.
Note – Day of the week
You can choose from German (GE), English (EN), French
(FR), Italian (IT), Spanish (SP), Dutch (DU) and Danish
(DA) for the day of the week display.
Alarm
Setting the alarm time
• Press the MODE button (A) to display the alarm time.
• While the alarm time is displayed, press the
(B) or the button (C) to activate or deactivate the
alarm.
• Press and hold the MODE button (A) for approximately
3 seconds to set the alarm time of the alarm displayed.
The hours display begins to flash.
• Press the
hour for the alarm time, and confirm your selection by
pressing the MODE button (A). The minutes display
begins to flash.
• Repeat the process to set the minutes for the alarm
time.
• If you do not make an entry for 20 seconds, you
button (B) automatically exit Settings mode.
• Press the MODE button (A) twice in succession to
display the second alarm time.
• Repeat the process to set the second alarm time.
Enabling/disabling the alarm
• To select and activate or deactivate the appropriate
alarm, press the Mode button repeatedly to select A1
or A2. Press the
activate or deactivate the alarm.
• An active alarm is displayed by the alarm symbol
or
corresponding alarm symbol
When the alarm is triggered, the active alarm symbol
(2/5) begins to flash and an alarm sounds. Press any
button (except the
Otherwise, it will stop automatically after 2 minutes.
Note – Snooze function
• While the alarm signal is sounding, press the
button (E) to activate the snooze function. The alarm
signal will stop for 5 minutes, after which it will
sound again.
• Press any button (except the
the snooze function and the alarm.

6.4 Weather forecast

button
• Based on changes in the atmospheric pressure and the
data saved, the base station is able to make weather
forecasts for the next 12 to 24 hours.
button (B) or the
button (B) or the
. When an active alarm is deactivated, the
button (E)) to stop the alarm.
button (C) to select the
button (C) to
or disappears.
button, E) to stop
7