Installation
Installing the Cables at the SIP/HFA Phone
See the
page 2.
1. Insert the LAN cable into the jack
2. If your LAN does not have PoE (Power over Ethernet; ask your service personnel), then you
need to use a power supply.
To prevent damage to the unit, it is imperative that you observe the following:
The power supply may only be plugged into the
Insert the power supply plug into the jack
3. All other jacks are optional:
–
: LAN connection to PC.
–
: Connection to Headset
–
: Connection to add-on device
–
: Connection to external keyboard
–
: USB master for connection to a USB device
To prevent damage to the unit, it is imperative that you observe the following:
If an USB stick should be connected to the USB interface, an adaptor cable (order no.:
C39195-Z7704-A5) has to be used.
The unit is now ready for operation.
If further settings are required for correct operation of the telephone, contact your service per-
sonnel.
Installing the Cables at the TDM Phone
See the
page 3.
1. OpenStage 20/40 T:
Insert the U
P0/E
OpenStage 60/80 T:
To prevent damage to the unit, it is imperative that you observe the following:
The power supply may only be plugged into the
Insert the U
P0/E
supply with jack
2. All other jacks are optional:
–
: Connection to Headset
–
: Connection to add-on device
–
: Connection to external keyboard
–
(left): USB slave for connection to the PC ("1st party CTI")
–
(right): USB master for connection to a USB device
To prevent damage to the unit, it is imperative that you observe the following:
If an USB stick should be connected to the USB interface, an adaptor cable (order no.:
C39195-Z7704-A5) has to be used.
The unit is now ready for operation.
If further settings are required for correct operation of the telephone, contact your service per-
sonnel.
[1] Not OpenStage 20
[2] OpenStage 60/80 only
12
[1]
.
[1]
cable into the jack
cable into jack
on the power supply and connect jack
on the base of the telephone.
[1]
.
[1]
on the base of the telephone.
on the base of the telephone.
.
[2]
.
[2]
.
on the base of the telephone.
.
[2]
.
jack.
jack.
on the power
[1]
.
[2]
.