Siemens OpenStage 20 Information Seite 11

Documentation on the Internet
In addition to this document, you can find detailed information about your telephone and the
accessories on the Internet at:
http://www.siemens.com/enterprise
Select the kind of documentation and search for "OpenStage".
To view and print the PDF documentation, you need the free download software
For additional technical notes, current information about firmware updates, frequently asked
questions, and much more, go to http://wiki.siemens-enterprise.com/.
OpenStage Manager
For administration of OpenStage 60/80 the OpenStage Manager PC software can be used:
• Administer OpenStage Phone Book (Synchronize contacts, Edit Phone Book, Add pictures)
• Load screen saver pictures
• Configure OpenStage phone
Free Download: http://www.siemens.com/enterprise
Installation
If you need assistance with the installation of your telephone, consult your service personnel.
Package Contents
Verify the package contents first:
• Telephone
• Handset
• Handset cable
• Sticker for important numbers
• This document
A power supply is not included. For information about electrical power, see the important notic-
es on page 10.
Before Installing the Telephone
See the page 2,
1. Insert the plug on the long end of the handset cable into the jack
telephone and press the cable into the groove provided for it.
2. Insert the plug on the short end of the handset cable into the jack on the handset.
3. Write your telephone number and those for the fire and police departments
on the included label and attach it to the telephone housing underneath the
handset (see arrow).
Installation at Place of Use
Notes about Place of Use
• Operation of a SIP/HFA phone is only permitted with indoor LAN cabling (SELV network ac-
cording to IEC 60950-1). The device shall be connected to the IP infrastructure using a
shielded Cat 5 LAN cable. The LAN cabeling of the building shall ensure that the shield of
this cable is grounded.
• The telephone should be operated in a controlled environment with an ambient temperature
between 5 °C and 40 °C (41 °F and 104 °F).
• Do not install the telephone in a room where large quantities of dust accumulate; this can
considerably reduce the service life of the telephone.
• Do not expose the telephone to direct sunlight or any other source of heat, as this is liable
to damage the electronic equipment and the plastic casing.
• Do not operate the telephone in damp environments such as bathrooms.
"Downloads"
page 3.
"Adobe
"Downloads" "Software"
on the base of the
Installation
Reader".
11