Folding The Treadmill - Omni OM2063CA Bedienungsanleitung

38

FOLDING THE TREADMILL

Before folding the treadmill make sure that it is unplugged from the mains.
Folding:
Grasp the treadmill at the lower end of the belt
and fold the entire running surface upwards. A
"click" sound should be audible at the end of the
folding process.
TO UNFOLD THE TREADMILL, PLEASE
PRESS HERE WITH YOUR FEED.
www.omni-fitness.eu
OM2063CA Instructions manual Treadmill OMR 5.0 .indd 38
Unfolding:
To unfold, push against the running surface
upright/return fitting with your foot. Do-
ing this will release the holding mechanism
and the treadmill will automatically move
towards the floor.
Transporting:
To transport the treadmill place one foot
lightly on the middle strut between the two
feet and position your hands at the upper
end of the treadmill. Pull the treadmill to-
wards your body; it is now positioned on its
rollers and can be rolled.
CAUTION: Rollers can cause scratches or similar
damage to parquet flooring or soft wooden floors.
Make sure you place the treadmill on a sheet or
mat and use the sheet or mat to transport it. Your
dealer and the manufacturer accept no liability for
any damage caused by failure to observe these
instructions.
30.01.2012 16:29:13