Assembly; Step 1 - Unpacking The Treadmill; Step 2 - Assembling The Uprights; Assembling The Computer - Omni OM2063CA Bedienungsanleitung

ASSEMBLY

STEP 1 - Unpacking the treadmill

Remove the treadmill carefully from the box and position it
on a flat, even surface.
Caution: Be wary of areas where your fingers may get
jammed.

STEP 2 - Assembling the uprights

Insert the left upright into the cut-out on the main frame.
Secure the upright on the main frame with five Allen screws
M8x20 from the rear and front.
Before you attach the right upright to the main frame,
connect the computer cable on the main frame with the
computer cable on the right upright and route the cable
through the right upright and out through the top.
Then secure the right upright on the main frame with five
Allen screws M8x20 from the rear and front.
STEP 3 Assembling the computer
The connect the computer cable on the right upright with
the computer cable on the computer.
Position the computer on the uprights.
Secure the computer on the uprights using 3 Allen screws
M8x20 per upright.
OM2063CA Instructions manual Treadmill OMR 5.0 .indd 29
Insert the mains plug into the power socket.
The treadmill now has an extra safeguard and can only be
actuated using the emergency stop safety key.
30.01.2012 16:29:05