Assembling The Fitness Equipment; Technical Specifications - Omni OM2063CA Bedienungsanleitung

26

ASSEMBLING THE FITNESS EQUIPMENT

a. Before you starting assembling the equipment, you
should allow it to acclimatise at room temperature
for one to two hours.
b. Choose a space on the floor or a workbench where
you have sufficient freedom of movement to assem-
ble the fitness equipment. To avoid damage to the
flooring, always assemble the exercise equipment on
a suitable underlay such as a piece of cloth or a mat.
The device should always be placed on a suitable un-
derlay, mat etc. during use/exercise to avoid damage
to the flooring.
c. Remove all parts from the transport packaging and
remove all protective films, transport straps, and
belts. Caution: Avoid protective foils from becoming
a deadly trap for children (danger of suffocation!).
d. Lay out all the parts in the correct order and check
the parts list to make sure that you have all the parts,
screws, and other components.
e. If parts are missing or damaged, please contact our
service team directly on:
+49 (0) 1805 / 346412 Mo - Fr 9.00 a.m. - 6.00
p.m. (CET/CEST)
ekom landline in Germany. Max. charge of 42 cents/
minute applies to calls from mobile networks. Calls
from abroad may vary).

TECHNICAL SPECIFICATIONS

Article number:
net weight:
Dimensions (approx.):
Dimensions
(approx.) (folded):
Max. user weight:
Test standards:
Motor:
Speed:
Tilt adjustment:
Noise emissions:
SCOPE OF DELIVERY:
Installation tools: Allen key (5mm), Allen key
(6mm), Phillips head screwdriver, bottle of silicon
oil, installation and operating manual. Assembly
parts as described in the enclosed parts list (some
pre-assembled)
www.omni-fitness.eu
OM2063CA Instructions manual Treadmill OMR 5.0 .indd 26
(14 Ct./min. for calls from Dt. Tel-
OM2063CA
94 kg
178 x 88.4 x 131 cm (LxWxH)
110 x 88.4 x 150 cm (LxWxH)
130 kg
EN-957-1/6, Class H/C
Peak output 3.5 HP/Constant 2 HP 1300 Watts
1-18 km/h
0-15%
The treadmill complies with all noise emission requirements. Noise
emissions are below 70 db during normal operation.
f. If you experience difficulty setting up or commis-
sioning your equipment, our service department
will be happy to help you! In most cases, problems
have simple causes and can easily be resolved over
the phone, even if technical complex devices are
concerned.
30.01.2012 16:28:57