ASROCK B550 Pro4 Bedienungsanleitung Seite 35

B550 Pro4
Step 3
1
2
Before installing a M.2
1
(NGFF) SSD module, please
loosen the screws to remove
the M.2 heatsink.
*Please remove the protective
films on the bottom side of
the M.2 heatsink before you
install a M.2 SSD module.
Step 4
Prepare the M.2 standoff that comes
with the package. Then hand tighten
the standoff into the desired nut
location on the motherboard. Align
C B A
20 o
and gently insert the M.2 (NGFF)
SSD module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
C B A
Step 5
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw
as this might damage the module.
C
NUT2 NUT1
33