Beyerdynamic UNITE TP Kurzanleitung Seite 28

28
the receiver's display.
• The following diagram shows an example of two
transmitters with different channel names, and a
receiver that can find and switch between both
transmitters. Finding and/or switching between
channels can take several seconds.
• Change the channel on the receiver via the dynamic
channel search. Press the p or q symbol of the
channel buttons and confirm the displayed "Scan for
channels?" question with "Yes" by pressing the menu
button. Depending on the DECT environment and the
distance to the transmitter, it may take several
seconds to find the channels.
• Press the p or q symbol of the channel buttons to
select the transmitter (channel name). In order to
confirm press the On/Off and menu button
Note: Once the channel search is started, the receiver
will lose its connection to the previous transmitter.
5.4 How to create a pairing
There are three different ways to pair the Unite transmitters
with receivers:
1. Via an individual charger.
2. Using the Unite Manager Software on a PC.
3. Via dynamic channel search.
If you want to use a group ID of the individual encryption
range 1 to 149, you must perform a pairing with a charger
or the Unite Manager PC software.
You will find detailed descriptions in the Quick Start
Unite TP – Bodypack Transmitter
.