Technical Data - Nedo X-Liner 2 Bedienungsanleitung

7 Technical Data

Type
Ref.-No.
Laser configuration
Accuracy
Damping
Thread
Working range
Wavelength
Laser class
Output
Self-levelling range
IP protection class
Power supply
Battery life
Operating temperature
Storage temperature
Dimensions
Weight
We reserve the right to make technical changes.
8 Checking the Unit's Accuracy
The accuracy of the laser beam should be checked regularly. This requires a free measuring
length of 10 m. The check is carried out in two steps.
Step 1
• Position the X-Liner 2 as shown in the figure to the
right.
• Switch on the horizontal beam at the X-Liner 2.
• Mark point A on the laser line.
• Rotate the X-Liner 2 through 180° and mark point B
on the laser line.
Operating Instructions X-Liner 2
X-Liner 2
460 870
2 lines: 1 horizontal, 1 vertical, together 1 cross (H/V)
Levelling accuracy: ±0.3 mm/m
Horizontal beam: ±0.3 mm/m
Vertical beam: ±0.3 mm/m
Magnetic
BSW 1/4" and BSW 5/8" on the multi-functional base
30m
635 nm
2M
< 1 mW
±4°
IP54
Batteries: 3 x 1.5 V (AA)
approx 20 h
-10 °C bis +50 °C
-20 °C to +70 °C
L 128 mm / W 58 mm / H 97 mm
0.47 kg
EN
12