Nedo X-Liner 2 Bedienungsanleitung Seite 10

4 Structure of the Instrument
Unit ON/OFF switch and pendulum locking device
Position 1
The pendulum locking device is locked.
The self-levelling is disabled and the LED
1
(4) on the keypad lights up red if the laser
beam is switched on.
Position 2
The pendulum locking device is unlocked.
The self-levelling is enabled and the LED
1
(4) on the keypad lights up green if the
laser beam is switched on.
ON/OFF or rather selection button and LED
display
PULS button
1 Switches the laser to PULS mode for use of a
laser receiver.
LED display above PULS button
2 "OFF": Pulse mode is switched off.
"BLUE": Pulse mode is switched on.
ON/OFF button
Switches the laser beam on and on/off in the
relevant order:
Press 1x: Switch on unit,
Horizontal laser beam (H)
3
Press 2x: Vertical laser beam (V)
Press 3x: Horizontal (H) and vertical (V) laser
beam
To switch the unit back off again, press the
ON/OFF button for longer than 3 secs.
LED display above ON/OFF button
"RED" : Unit switch in position 1.
"GREEN": Unit switch in position 2.
4
If the battery charge is weak the LED display (4)
above the ON/OFF button (3) begins to flash. If
the batteries are too weak the laser switches off.
Operating Instructions X-Liner 2
1
2
1
3
EN
4
10