Steps
1. Align the hard-drive assembly at an angle to the slot on the computer.
2. Press the release tabs on the hard-disk drive bracket and slightly align back to insert the hard-disk drive assembly to the slot on the
computer chassis.
3. Connect the hard-drive data and power cables to the connectors on the 2.5-inch hard-disk drive module.
Next steps
1. Install the
fan
duct.
2. Install the
side
cover.
3. Follow the procedure in
3,5-Zoll-Festplattenlaufwerk
24
Ausbau und Wiedereinbau
after working inside your
computer.