Velleman CAMCOLVC21 Bedienungsanleitung Seite 4

 Protect this device from shocks and abuse. Avoid brute force
when operating the device.
 Do not aim the camera at the sun or other extremely bright
objects.
 Familiarise yourself with the functions of the device before
actually using it.
 All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
 Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
 There are no user-serviceable parts inside the device. Refer to an
authorized dealer for service and/or spare parts.
 Do not use this product to violate privacy laws or perform illegal
activities.
4. Overview
Refer to the illustrations on page 2 of this manual.
1 Mini-USB connector
2 lens
3 reset button
4 TV-OUT connector
5 speaker
6 display
7 control buttons
8 LED indicators
5. Installation
Mounting
To install the camera, proceed as follows:
1. Slide the bracket [15] into the shoe [12] on the camera.
2. Pull the two magnetic halves [14] of the bracket apart.
3. Make sure that the mounting surface is dry, clean, and grease-
free.
4. Remove the protective film from the mount plate [13] and paste
V. 02 – 05/05/2014
CAMCOLVC21
9 HDMI connector
10 power button
11 microSD card slot
12 bracket shoe
13 mount plate with tape
14 magnet
15 bracket
16 lever
4 ©Velleman nv