Video Playback; Photo Setup - Velleman CAMCOLVC21 Bedienungsanleitung

Tip: even if the G-sensor is disabled, you can press the
to manually switch to emergency recording.
 Manual: if you disable motion detection, press REC to start and
stop recording manually.
During recording, the red LED [8] blinks.
7.3

Video Playback

To play back recorded videos, proceed as follows:
1. Press MODE repeatedly to select playback mode. The list of
recorded videos appears.
2. Select the desired video file and press REC to start playback.
o Press REC to pause/restart.
o Use and
7.4 Deleting Videos
To delete one or more videos, proceed as follows:
1. In the list of videos, select the video that you want to delete and
press MENU.
2. Choose Delete, then choose Single to delete one video, or
choose All to delete all videos. Choose Yes to confirm.
7.5 Locking Videos
You can lock videos so you cannot delete them accidentally. To
delete a locked video, you have to unlock it first. To lock/unlock one
or more videos, proceed as follows:
1. In the list of videos, select the video that you want to lock and
press MENU.
2. Choose Protect, then choose Single to lock one video, or choose
Protect all to lock all videos. Choose Yes to confirm.
3. To unlock a video, select the locked video and press MENU.
4. Choose Single to unlock one video, or choose Unprotect All to
unlock all videos. Choose Yes to confirm.
8. Photos
8.1

Photo Setup

To specify settings for photos, proceed as follows:
1. In photo mode, press MENU.
2. Make sure that photo settings
confirm.
All settings are described in detail below.
V. 02 – 05/05/2014
CAMCOLVC21
to fast forward/fast rewind.
10
are selected and press REC to
button
©Velleman nv