Instruction Manual; Before Starting The Engine - KLIPPO Brilliant S Bedienungsanleitung

GB
Safety instructions for power lawnmower with horizontally rotating blades
1. Keep hand and feet clear of the rotating blades and never
put your hand or foot into any ejector opening without fi rst
making sure that the blade is not moving and the ignition
cable is disconected from the spark plug.
2. Do not touch the blade until the ignition cable has been
disconected from the spark plug. Rotating the blades may
cause the engine to start.
3. Do not leave the machine unattended without stopping
the engine.
4. The engine speed regulator must not be disabled. The
pre-adjusted number of revolutions may not be changed.
Protections and safety devices may not be taken away or
be set out of function.
5. Do not top up with fuel when the engine is warm. Don´t
smoke while fi lling up with fuel or in the near of the tank.
WARNING! Petrol is very fl ammable! Store the fuel in
containers intended for petrol. Don´t remove the fuel fi ller
or fi ll up with fuel while the engine is running.
6. Never allow children or other persons whom are not fami-
liar with the machine to operate the lawnmower.
LOWER HANDLE, BRILLIANT is assambled according to fi g. 15.
LOWER HANDLE; COBRA is assemled according to pictures 16.
UPPER HANDLE Fitted without tools, with a strong nut on the
articulated plate.
HANDLE POSITION When required, the handle can be rotated
laterally to some extent by means of the handle joint, e.g.,
when mowing close to hedges or house walls.
On BRILLIANT the handle could be changed in height by
screwing out the lower of the fastening nuts for the handle
about 8 mm.
On the COBRA model you set the height of the handlebar
by gripping the handlebar with your one hand and grip the
adjustment handle just behind the engine with the otherhand.
Put the handlebar in a suitable position and loose your grip
around the adjustment handle. See to that handlebar is right
Before starting engines for the fi rst time: fi ll with oil (fi g 3.) and READ THE ENCLOSED INSTRUCTION MANUAL FOR THE ENGINE!
MANUAL FOR THE ENGINE!
Unscrew the dipstick and fi ll up with approx. 0,6 lit. of engine
oil, viscosity SAE 30, Klippo oil no. 502873501 or accor-ding
to the engine manual. Fill up to the full graduation mark on the
dipstick (do not fi ll above it). NB. THE OIL IS DRAINED PRIOR
TO DELIVERY!
When operated for the fi rst time, the silencer will change
colour and may smoke briefl y.
OIL CHECK
Check the oil level before starting and every fi ve hours. Take
off the dipstick and dry it up. Screw the dipstick into the tube
completely and make sure that the oil reaches the FULL mark
(fi g. 3).
17
Downloaded from www.Manualslib.com
Instruction manual for
KLIPPO LAWNMOWERS
Models: Brilliant, Brilliant S Selfstart, Cobra S, Cobra SE.
Engines: Briggs & Stratton; 625 Series, 700 Series DOV.
Congratulations on purchasing a Klippo Lawnmower!
Before starting, we recommend that you carefully read instruction manual in order to obtain
These instructions are to be carfully studied before the lawnmower is used.

Before starting the engine

manuals search engine
the best from your mower.
Even if the machine has very effective protections it could
throw out solid objects that can cause injurys.
7. Keep the lawn as clear as possible of stones or other
objects that the lawnmower can strike. Avoid driving over
gravel paths etc.
8. Famillarize lawnmower operators with the risks and ex-
plain how accident are to be avoided.
9. The machine may not be used for any other purpose than
cutting grass.
10. Wear pants and suitable shoes while cutting grass. Bea-
ware that a lawn could be slippery!
11. Don't leave the electric start models with the ignition key!
12. Brilliant S Selfstart: Don't leave the mower with the orange
locking device in position!
13. Never touch anything under the cutting deck, as for
instance dismount or mount the mulching insert, without
disconnecting the spark plug cable fi rst.
14. Do not use the lawnmower if any protection or safety
device is damaged. Inspect the machine before every use.
Control regularly that all screws and nuts are fastened,
especially blade and engine.
Fitting and adjustment
in position and properly fastened.
SETTING THE CUTTING HEIGHT (fi g. 17)
Move the leverrearwards for taller grass. The lever positions
correspond 20-70 mm cutting height on the Brilliant, 25-55
mm on the Cobra. All the wheels are set simultaneously in
one operation. Make use of the effi cient height setting of the
KLIPPO lawn-mowers when mowing edges or trimming.
Never cut grass unnecessarily short. This makes spreading/
collection more diffi cult and increases the risk of "scalping".
COLLECTING BAG, BRILLIANT should be assembled according
to fi g. 15.
COLLECTING BAG, COBRA should be assembled according to
fi g 20.
MULCHER-PLUG COBRA, see page 21.
RUNNING-IN andFIRST OIL CHANGE
The engine has already been adjusted and required no run-
ning-in as such, although you should run it at no more than
moderate load for the fi rst few hours. Remeber to change the
oil the fi rst time after fi ve hours of operation, and then every
twenty-fi ve hours.
PETROL
Use leadfree 95 octane petrol. Stop the engine before fi lling.
Do not overfi ll the tank so much that it overfl ows. Leave
around 6 mm for the fuel to expand.
Don´t let the machine stay over the winter with petrol in the
tank. This could cause starting problems in spring.