Display; Troubleshooting; Maintenance And Care - ANSMANN 1001-0080 Bedienungsanleitung

DISPLAY

• The timer shows the duration of
time that the mode is currently
in operation.
• The mAh indicator shows the
charge flow until now.
• The voltage indicator shows the
rechargeable battery's current
voltage.
Note: If no button is pressed for
30 seconds, the display backlight
turns off automatically.

TROUBLESHOOTING

Indicator
Zero
Err

MAINTENANCE AND CARE

Cleaning
• Before cleaning the product, disconnect the product from the
power supply and remove all rechargeable batteries.
• Use only a soft, dry or slightly damp cloth (where necessary with a
little mild dishwashing detergent) to clean the product. Never use
any abrasive cleaners or solvents to clean the product.
Deutsch |
16
Possible cause
No rechargeable
battery is inserted/
recognized.
The rechargeable
battery is defective.
Li-Ion <2 V,
NiMH/NiCd <0.2 V
The rechargeable
battery is inserted
incorrectly (reverse
polarity).
English | Français | Español | Português
Svenska | Italiano | Nederlands
Indicator Charge level
approx. 0-20 %
approx. 20-40 %
approx. 40-60 %
approx. 60-80 %
approx. 80-100 %
Solution
Reinsert the rechargeable
battery.
Return the rechargeable
battery to a collection point.
Reinsert the rechargeable
battery with correct polarity.