Specifications; Product Identification; Product Description; Parts Supplied - CAMPAGNOLA Super Star 2 Gebrauchs- Und Wartungsanweisung

3

- SPECIFICATIONS

3.1 Product identification

The details used to identify the tool are stamped on the nameplate (1).

3.2 Product description

The pneumatic shear with a single cutting blade in hardened steel has been designed for pruning orchards, vineyars, citrus,
olive trees, green and ornamental trees, etc.
The cutting blade power is provided by a pneumatic piston inside a cylinder with an outer body made of thermoplastic resin. The
piston stroke action is driven by compressed air by means of a trigger in the tool hand grip.
The safety hand guard protects from unforeseen tool working. Whenever the trigger is released, an automatic safety catch, to
be found on the trigger, will lock it.

3.3 Parts supplied

Kit with spare seals.

3.4 Recommended use

The tool has been designed for pruning operations to be performed according to the descriptions in this manual.
WARNING!
• If it is not used as specifically described in this manual, the tool may be potentially dangerous for the operators. In
this case the manufacturer is entitled to void the warranty.
• If it is not used for the purposes it was designed for, the shear may cause serious injury to personnel and bystand-
ers and damage to equipment and things.

3.5 Description of the tool

• Ergonomically designed handle (2) in acetic resin.
• Control lever (6).
• Automatic safety catch (5).
• Safety guard (4).
• Blades in forged hardened steel.

3.6 Technical details

• Cutting diameter: .......................................................................... 31 mm
• Handle diameter: ......................................................................... 46 mm
• Max. air consumption: ............................................................. 0,9 Nl/min
• Working air pressure: ................................................. 1000 kPa (10 bar)

3.7 Safety devices

• The safety catch (5) is engaged automatically when the control lever (6) is released and prevents the tool from being
started up accidentally.
• The safety guard (4) protects the operator's hands.
17 - 64