Loewe Assist Multi-Control Bedienungsanleitung Seite 29

Internet update
The update begins. A message appears informing you of the status of the
update, as well as when it is finished.
Loewe Assist Update
Update successful!
The code 345 has been successfully activated on key STB.
You can now disconnect the USB connector and close this program!
End the update program with Finish.
Reading out the STB code
You can read out the currently set STB code (in the following example code
"359").
➠
The latest version of this operating manual (e.g. after a software
update) is available for downloading as a PDF-file here:
www.loewe-int.de/en/support – User guide
and click on
Press the STB button for at least 5 seconds.
The LED above the STB button flashes twice.
Enter code 002.
The LED above the STB button flashes twice.
Press button 1 to determine the first (left) position of the
three-digit code. The LED flashes 3x for the number 3 for
example.
Press button 2 to determine the second (middle) position
of the three-digit code. The LED flashes 5x for the
number 5 for example.
Press button 3 to determine the third (right) position of
the three-digit code. The LED flashes 9x for the number
9 for example.
The LED does not flash for the number zero.
Download as PDF.
< Back Finish
library. Select your device
29 -