Connections; Operating Data - IME CONTO D4-Pd Bedienungsanleitung

63A energy meter,
MID direct connection

5. CONNECTIONS

Wiring diagrams:
L1
N
11 1 3
L1
L2
L3
*
N
* 3N-3E
Terminal board marking and diagram combination:
T1 / T2 RS485
E
SG
1 C
+ –
12 / 24V d.c.
INPUT OUTPUT
E
1 C
12 / 24V d.c. Max. 30V 50mA
T1 / T2 MBUS
E
1 C A B
12 / 24V d.c.
Technical data sheet: IDP000190EN_01
L2 L3
4 6 7 9
T1/T2
1 C
Modbus RS485
+
MBUS
A B
Codes: CE4DF30PMID – CE4DF3DTMID – CE4DF3MTMID
Model: CONTO D4-Pd

6. OPERATING DATA

6.1 ELECTRIC DATA
Currents:
- Reference current, I
- Minimum current, I
- Maximum current, I
Rated voltages:
- Three-phase rated voltage Un: 3x230V∼ / 3x400V∼ ±15%
Rated frequency:
- F : 50Hz; 60Hz
n
- Permitted variation: 49...51Hz; 59...61Hz
Connectable section:
- Copper wires
- Voltage connection terminals (L1, L2, L3, N):
Rigid wire
Flexible wire
- Terminal boards in the upper part of the meter (input, impulse
output and Mbus):
Rigid wire
Flexible wire
:
Necessary tools
- For the voltage connection terminals (L1, L2, L3): screwdriver
with 6mm blade or Pozidriv No. 2
- For the Neutral (N) connection terminal: screwdriver with 6mm
blade or Pozidriv No. 2
- For the terminal boards in the upper part of the meter (input,
impulse output and bus): screws with 2.5mm blade
SG
Updated: -
: 5A
ref
: 0,25A
min
: 63A
max
Without bush With bush
1 x 0,75 ÷ 16 mm²
1 x 0,75 ÷ 10 mm² 1 x 4 ÷ 10 mm²
Without bush With bush
1 x 0,2 ÷ 1,5 mm²
1 x 0,2 ÷ 1 mm² 1 x 0,2 ÷ 1 mm²
Created: 15/03/2019
-
-
2 | 7