Connections; Operating Data - IME CONTO D2 Handbuch

63A single-phase energy meter,
direct connection

5. CONNECTIONS

Wiring diagrams:
N
L
N
Terminal board marking and diagram combination:
T1 / T2 RS485
E
SG
1 C
+ –
12 / 24V d.c.
INPUT OUTPUT
E
1 C
12 / 24V d.c. Max. 30V 50mA
Technical data sheet: IDP000194EN_01
T1/T2 (INPUT)
1 C
Modbus RS485
+
Codes: CE2DF30PCL1 – CE2DF3DTCL1
Model: CONTO D2

6. OPERATING DATA

6.1 ELECTRIC DATA
Currents:
- Reference current, I
- Minimum current, I
- Maximum current, I
Rated voltages:
- Three-phase rated voltage Un: 230V ±15%
Rated frequency:
- F : 50Hz; 60Hz
n
- Permitted variation: 49...51Hz; 59...61Hz
Connectable section:
- Copper wires
- Voltage connection terminals, neutral:
Rigid wire
Flexible wire
- Terminal boards in the upper part of the meter (input, impulse
output):
Rigid wire
Flexible wire
:
Necessary tools
SG - For the voltage connection terminals, neutral: screwdriver
with 6mm blade or Pozidriv No. 2
- For the terminal boards in the upper part of the meter (input,
impulse output): screws with 2.5mm blade
Updated: -
: 5A
ref
: 0,25A
min
: 63A
max
Without bush With bush
1 x 0,75 ÷ 16 mm²
1 x 0,75 ÷ 10 mm² 1 x 4 ÷ 10 mm²
Without bush With bush
1 x 0,2 ÷ 1,5 mm²
1 x 0,2 ÷ 1 mm² 1 x 0,2 ÷ 1 mm²
Created: 18/03/2019
-
-
2 | 7