Schubert Preludio Handbuch Seite 34

EN
34
When the keyboard split function is enabled, the scale of the left-hand zone
will increase by an octave, and the scale of the right-hand zone will decrease by
an octave. Take the default split point as an example, scales of Keys A0 – G2#
will change to those of Keys A1 – G3#, while scales of Keys A2 – C8 will change
to those of Keys A1 – C7.
• Press the [FUNCTION] button (4) and the [SPLIT VOLUME] selection keys
[1] to [5] (19) to set the volume for the left-hand zone.
• After the keyboard split function is enabled, you can reselect a timbre for
the right-hand zone.
Dual timbre
Press any two timbre buttons simultaneously to enable the dual timbre
function, in this case, the two selected timbre will be overlaid.
• When overlay of other timbres are required, press the [GM TIMBRE]
button (11) and the [DEMO SONG / GM TIMBRE] keys (25) to select other
timbres.
• Then press the [GM TIMBRE] button (11) and other [TIMBRE] buttons (9)
simultaneously.
Both volumes for the upper layer and the lower layer have 5 grades:
• The volume of the first selected timbre is adjusted via the upper volume by
pressing the [FUNCTION] button (4) and the [UPPER VOLUME] selection
keys [1] to [5] (21) on the keyboard.
• The volume of the later selected timbre is adjusted via the upper volume
by pressing the [FUNCTION] button (4) and the [LOWER VOLUME]
selection keys [1] to [5] (21).