Schubert Preludio Handbuch Seite 33

Touch control
• Press the [FUNCTION] button (4) and the [TOUCH] selection buttons (14)
to adjust the key touch force.
• Use the [TOUCH - OFF] key to deactivate the function, and use the [1] to
[3] keys to set one of the 3 touch force grades.
Split
The keyboard can be split into two zones, in this way, you can play two
different timbres with your left and right hands respectively. You should set
the timbre for the right hand side after the timbre that you were using before
splitting is applied to the left-hand side. For example, you can set the timbre of
the left-hand side to "Bass" and the right-hand side to "Piano".
• Press the [SPLIT] button (8) to split the keyboard, and press the [SPLIT]
button again to disable the keyboard split.
• You can set the SPLIT point where you want to split the keyboard. Press
the [SPLIT] button first and then press the key simultaneously from which
you want to split the keyboard. The currently pressed key (SPLIT point)
will be the first key of the right-hand side.
After keyboard split, all keys on
the left of the currently pressed
key constitute the left-hand
zone, with scale increasing by
an octave.
(Split point The currently pressed key and
setting) all keys on its right constitute
the right-hand zone, with scale
decreasing by
an octave.
EN
33