HQ Power VDPL1801MHW10 Bedienungsanleitung Seite 7

• DMX Mode
{Address} Enter the address mode to set the DMX address
• Run Mode
{Run} Enter the run menu in order to select the operation mode. For stand-alone operation, select between
modes {AUTO 1}, {AUTO 2}, {SOUND 1}, {SOUND 2} and {CUSTOM}.
{CUSTOM} To control with a DMX512 controller select {DMX}. To set the unit as a slave, select {SLAVE}.
• Edit Program
{Step} Select the step to be created or edited. Unused steps should have the time set as 0.
{Pan} Set the PAN position of the LED fixture (0-255).
{Tilt} Set the TILT position of the LED fixture (0-255).
{Red} {Green} {Blue} Combine RED, GREEN and BLUE to create a wide range of colours (0-255).
{Strobe} Select the strobe speed (0-255).
{Time} Set the time for the current step (0-8). The unit is 1 second.
{Fade} Set the fade time of the current step (0-8). The unit is 1 second.
{Reset Custom} Enter in order to reset all settings in custom mode.
• Other Functions
{Fan speed} Set the fan speed as HIGH or LOW.
Note that when the fan speed is set to low that any overheating by the unit will automatically
change the fan to high speed.
{Invert Pan} Select ON in order to invert the PAN values.
{Invert Tilt} Select ON in order to invert the TILT values.
{Reset} Select RESET to reset the fixture.
{Load default} Select LOAD DEFAULT to reset all settings in the fixture (not in custom mode).
VDPL1801MHW10
7 HQPOWER