Inserting Accessories; Operation; Setting The Clock Time; Child Lock - Medion MD 16752 Bedienungsanleitung

` Confirm your selection by pressing the
` Press the button repeatedly until you have set a cooking time of 10 minutes.
` Press the button to start the heating process.
NOTE
During this initial heating period you may notice faint odours. These
smells are not dangerous and will disappear after a short time. Ensure
adequate ventilation e.g. by opening a window.
` After 10 minutes, the appliance turns itself off automatically. Wait
until it has completely cooled down.
` Remove the plug from the mains socket and then clean the appliance once
more inside and out with a damp cloth and dry the microwave off carefully.

8.3. Inserting accessories

When you have heated the microwave once in an empty state as described above, it
may no longer be used without the rotary plate inserted properly.
` Place the roller ring into the recess at the bottom of the cooking space.
` Place the rotary plate over the centre of the drive axis.

9. Operation

Every time a button is pressed you will hear a beep to confirm.

9.1. Setting the clock time

When the microwave is used for the first time or the power supply has been inter-
rupted, the screen shows Welcome . After a button has been pressed, 00:00 is
displayed and the time (24 hour display) must be set.
` Press the button once.
The hour display flashes.
` Press the or buttons to set the hour.
` Press the button.
The minute display flashes.
` Press the or buttons to set the minutes.
` Press the button again.
The time is now set.

9.2. Child lock

` In order to activate the child lock, press the
prox. 3 seconds. You will hear a beep and the display will show the lock symbol.
The microwave buttons will now have no function.
` To deactivate the child lock, press and hold down the
onds until you hear a beep and the lock symbol disappears from the display. All
button.
button and hold it down for ap-
button again for 3 sec-
DE
FR
NL
DK
EN
173 of 190