Hot Surfaces - Medion MD 16752 Bedienungsanleitung

IMPORTANT
Risk of damage to the appliance due to improper in-
stallation.
• The microwave is designed as a free-standing appliance. Do
not integrate it into kitchen units.
• Ensure that the mains cable is undamaged and does not run
underneath the appliance or over any hot surfaces or sharp
edges.
• Set up the microwave on a level, stable surface, which is able
to carry the weight of the appliance as well as the maximum
weight of the food which is to be prepared within it.
• Only set up the microwave in a safe, dry environment.
• The microwave must be positioned so that the rear of the ap-
pliance is facing a wall.
• Protect the microwave against water droplets or spray. If the
microwave nevertheless comes into contact with water, dis-
connect the plug from the mains socket immediately.
• Do not set up the microwave near to heat sources.
• Sensitive surfaces on the rotary plate. Avoid contact with
acidic foodstuffs. The rotary plate could be damaged.

4.3. Hot surfaces

WARNING!
Risk of injury through burning on hot surfaces.
• Do not touch the housing.
• In combi or grill mode, children may only use the appliance
under the supervision of adults because of the high tempera-
tures.
• After cooking in grill mode, the rotary plate will become very
hot! Always use a protective cloth or heat-resistant oven
gloves when removing the rotary plate from the cooking area.
DE
FR
NL
DK
EN
161 of 190