Control Board; Remote Control Socket - EuroLite TSL-100 Bedienungsanleitung

Control Board

The Control Board offers several features: you can e. g. simply set the starting address.
Enter the menu by pressing the Menu-button. You can change the selection by pressing Up or Down. You
can leave every mode by pressing the Menu-button. The functions provided are described in the following
sections.
After you connected the effect to the mains, the display shortly indicates "rSt" followed by:

Remote Control socket

If you wish to lock the light output - via an optional EUROLITE RC-1 remote control, connect your RC-1
remote control to the remote control socket.
The remote control RC-1 can be used for switching the gobos, colors and the Auto/Manual mode. In Auto
Mode, the gobos and colors are switched sound-controlled. In Manual Mode, the gobos and colors are
switched via remote control.
Sound Mode
(sound-controlled)
Manual Mode
Main menu Function
DMX address setting
With this function, you can adjust the desired DMX
512 address via the Control Board.
Slave setting
With this function, you can define the device as slave
(up to 4 slaves).
Master Mode setting
d-1-: Master-Mode, sound-controlled mode
d-2-: Master-Mode, automatic program mode,
d-3-: Blackout
PAN Reverse
With this function you can reverse the Pan-movement.
TILT Reverse
With this function you can reverse the Tilt-movement.
Display close time
With this function you can shut off the LED display.
Mode Red control-
LED
ON
OFF
Blackout OFF
Green control-
LED
OFF
ON
OFF
24/28
Gobo button Color
button
-- --
available available
-- --
00045979.DOC, Version 1.1