Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Ÿ
We recommend a broadband internet connection with a flat data rate because the amount of
data may be up to 2
Ÿ
F
or the commissioning of the RoCon G1 Gateway,
Power supply connection
The power supply of the RoCon G1 Gateway takes place through the wall plug transformer. To avoid damage to the device
please only use the originally supplied power supply unit.
The initial start-up of the Gateway may take a few minutes. About 30 seconds after connecting the RoCon G1 to the power
supply the
LED
on the side of the casing lights up in green.
Status
LED
colours
Colour
Permanently green
Blinking blue
Blinking yellow
Red blinking
Purple blinking
Further steps
To use the Gateway, you require a
http://www.daikin-control.com. On this website you can then connect the Gateway with the account and use it online or with a
smartphone app.
1
J13
Altherma
integrated
solar unit
EHS157034
EHS157068
Picture 3: Connection scheme RoCon G1
[
RoCon G1 - EHS157056
]
KA RoCon G1 - EHS157056 . 07/2019 . 008.1550899 00 - EN
GB
per month.
Meaning
Device ok, all connections
established.
No connection to RoCon
control established.
No internet connection
possible.
No connection possible to
the server
.
Update mode
Daikin
Cloud Service Account which is free of charge. Please register on
7
2
DHCP
must be activated on the Router.
Possible fault rectification / Description
-
Please check the connection between
control and Gateway.
Please check whether the power cable is
correctly connected to the router that supports
the DHCP.
The Daikim Cloud Server is currently not
available. Please contact the
service if this condition persists for more than one
hour.
Software is being updated.
6
1
[
RoCon G1 - EHS157056
Daikin
customer
5
1
Gateway
2
RoCon control
3
Connection cable RoCon control
4
Network cable
5
Network socket
6
Contactor contact socket
7
Power supply unit
4
3
]
3/24
Werbung
