Flash Mode - E-Ttl Autoflash; Fec: Flash Exposure Compensation - Hahnel Modus 600RT Bedienungsanleitung

Flash Mode - E-TTL Autoflash
This flash has three flash modes: E-TTL, Manual (M), and MULTI
(Stroboscopic). In E-TTL mode, the camera and the flash will work
together to calculate the correct exposure for the subject and the
background. In this mode, multiple TTL functions are available: FEC,
FEB, FEL, HSS, second curtain sync, modeling flash. These can be
controlled with the Modus 600RT or with the camera's menu screen.
* Press < MODE > Mode Selection Button and three flash modes will display on the
LCD panel one by one with each pressing.
ETTL Mode
Press < MODE > Mode Selection Button to enter E-TTL mode. The
LCD panel will display E-TTL.
• Press the camera release button halfway to focus. The aperture and
effective flash range will be displayed in the LCD panel.
• When the shutter button is fully pressed, the flash will fire a preflash
which the camera will use to calculate the correct flash output power
the instant before the photo is taken.

FEC: Flash Exposure Compensation

With FEC function, you can adjust the calculated level from -3 to +3
in 1/3 stops. It is useful in situations where minor adjusting of the TTL
system is needed based on the lighting environment.
16
Setting FEC:
1. Press Function Button
2 <
> and flash exposure
compensation amount will be
highlighted on the LCD panel.
2. Set the flash exposure
compensation amount.
• Turn the Select Dial to set
the amount.
• "0.3"means 1/3 step,
"0.7"means 2/3 step.
• To cancel the flash exposure
compensation, set the
amount to "+0".
>. The icon <
Modus 600RT