Flash Mode - I-Ttl Autoflash; Fec: Flash Exposure Compensation; Feb: Flash Exposure Bracketing; Fv Lock: Flash Value Lock - Hahnel Modus 600RT Bedienungsanleitung

Flash Mode - i-TTL Autoflash
This flash has three flash modes: i-TTL, Manual (M), and
RPT (Stroboscopic). In i-TTL mode, the camera and the
flash will work together to calculate the correct exposure
for the subject and the background. In this mode, multiple
TTL functions are available: FEC, FEB, FEL, HSS,
second curtain sync, modeling flash. These can be
controlled with the Modus 600RT or with the camera's
menu screen.
* Press < MODE > Mode Selection Button and three flash modes
will display on the LCD panel one by one with each pressing.
I-TTL Mode
Press < MODE > Mode Selection Button to enter i-TTL
mode. The LCD panel will display i-TTL.
• Press the camera release button halfway to focus. The
aperture and effective flash range will be displayed in
the LCD panel.
• When the shutter button is fully pressed, the flash will
fire a preflash which the camera will use to calculate the
correct flash output power the instant before the photo
is taken.

FEC: Flash Exposure Compensation

With FEC function, you can adjust the calculated level
from -3 to +3 in 1/3 stops. It is useful in situations where
minor adjusting of the TTL system is needed based on the
lighting environment.
18
Setting FEC:
1. Press Function Button
2 < >. The
icon < > and flash
exposure compensation
amount will be
highlighted on the LCD
panel.
Modus 600RT
SET

FEB: Flash Exposure Bracketing

The Flash Exposure Bracketing can be set from your
camera. Please refer to the Camera instruction manual for
further details

FV Lock: Flash Value Lock

The Flash Value Lock can be enabled from the camera.
Please refer to the Camera instruction manual for further
details
High-Speed Sync
High Speed Sync (FP flash) enables the flash to
synchronize with all camera shutter speeds. This is
convenient when you want to use aperture priority for
fill-flash portraits. To enable high speed sync in the Nikon
camera menu, set the flash sync speed to 1/320's (Auto
FP) or 1/250's (Auto FP). Refer to camera manual for
more info.
Modus 600RT
2. Set the flash exposure
compensation amount.
• Turn the Select Dial to
set the amount.
• "0.3"means 1/3 step,
"0.7"means 2/3 step.
• To cancel the
flash exposure
compensation, set the
amount to "+0".
3. Press < SET > button
again to confirm the
setting.
1. Press the camera
shutter button halfway
and the icon < > will
be displayed. If camera
(Auto FP) is enabled.
HSS is now turned on
19