Setting.the.date.and.time; Backlight - Lexibook Rlr800 Bedienungsanleitung

Setting the Date and Time
1. In clock display mode, press the SET.button.for..seconds.to.enter.in.
the.setting.mode..The.year.2005 flashes.
2. To adjust the year, press the UP.or.DOWN.buttons.and.then.press.
SET to confirm. The month flashes.
3. To adjust the month, press the UP.or.DOWN.buttons.and.then.press.
SET to confirm. The date flashes.
4. To adjust the date, press the UP.or.DOWN.buttons.and.then.press.
SET to confirm. Then 24 H flashes.
5. To select 12 or 24 hour mode, press the UP.or.DOWN.buttons.and.
then.press.SET to confirm. The hour flashes.
6. To adjust the hour, press the UP.or.DOWN.buttons.and.then.press.
SET to confirm. The minutes flash.
7. To adjust the minutes, press the UP.or.DOWN.buttons.and.then.
press.SET to confirm. Then 00 flashes (time zone selection).
8. To adjust the time zone, press the UP.or.DOWN.buttons..The.
adjustment range is: -12 ~ 12 hr. Press SET to confirm. Then ON.
flashes (Daylight Saving Time).
9. To select Daylight Saving Time (DST) ON.or.OFF, press the UP.or.
DOWN.buttons.and.then.press.SET to confirm. The display goes
back.to.clock.display.mode.
Note: During the setting process, if there is no confirmation within 30
seconds, the display will automatically go back to normal clock display
mode.

Backlight

In time display mode, press the LIGHT/SNOOZE.button.once..The.
backlight.will.be.on.for.5.seconds.
Downloaded from www.Manualslib.com manuals search engine
15