Radio-Controlled Clock; Presentation - Lexibook Rlr800 Bedienungsanleitung

1. Once batteries have been inserted in the unit, the radio-controlled
clock.will.automatically.receive.the.radio.signal..When.the.clock.
starts receiving the radio signal, the
adjustment.of.time.and.date.is.possible.while.the.clock.is.receiving.
the.signal..If.you.wish.to.interrupt.the.reception.and.set.the.time.and.
date manually, press the WAVE.button.and.enter.into.the.setting.
mode (see page 15).
2. When the clock has received the radio signal successfully, the
icon will stop flashing and will remain solid.
3. The radio-controlled clock will automatically receive the radio signal
everyday at 02:00. If it fails to receive the radio signal successfully,
it will check again at 3:00, 04:00 and 05:00. Once it will receive the
signal successfully, it will not check again for that day.
4. To trigger the radio signal manually, press and hold the WAVE.button.
5. When the alarm rings at the set time, the radio signal reception is
interrupted.

Presentation

Downloaded from www.Manualslib.com
SET
ALM
UP
DOWN
WAVE
ºC./.ºF
manuals search engine
icon will start flashing. No
LIGHT/SNOOZE
14
.