Teleco TVPL4868AC4 Handbuch Seite 14

4.2
Somfy Oximo motor
Option 1: configuration with DIP4
1
2 s
2
STOP
2 s
3
(> 2 s)
1s
STOP
4
5x
STOP
5
6
Move DIP5 to ON and DIP6 to OFF.
Move DIP4 to ON. The buzzer emits a
continuous sound for 2 seconds.
Press the "STOP" button of the transmitter.
The motor makes 4 movements in all and
the buzzer emits a continuous sound for 2
seconds at the end.
Press the "OPEN" button and hold it down
until the desired upper limit is reached.
Press the "STOP" button to confirm. The
buzzer emits a countinuous sound.
Press the "CLOSE" button and hold it down
until the desired lower limit is reached.
Press the "STOP" button to confirm. The
buzzer emits 5 fast beeps.
Move DIP4 to OFF.
Option 2: configuration with P3
1
Move DIP5 to ON and DIP6 to OFF
Press 8 times P3 button of a memorized transmitter,
2 s
and keep it pressed. The selected motor makes a
2
short movement and the buzzer emits a continuous
P3
sound for 2 seconds. In case of group command,
8 times
repeat this step to select another motor.
STOP
2 s
Press the "STOP" button of the transmitter. The motor
3
makes 4 movements in all and the buzzer emits a
continuous sound for 2 seconds at the end.
(> 2 s)
1s
STOP
Press the "OPEN" button and hold it down until the
desired upper limit is reached. Press the "STOP"
4
button to confirm. The buzzer emits a countinuous
sound.
5x
STOP
Press the "CLOSE" button and hold it down until
5
the desired lower limit is reached. Press the "STOP"
button to confirm. The buzzer emits 5 fast beeps.
2x
In order to program other motors resume the
6
procedure from the step 1, otherwise exit by
pressing P3 button until the buzzer emits 2 beeps.
P3
14
.