Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3
1.1
WIND sensor
The anemometer (ANEM4) detects wind speed, which the control unit compares with the threshold set through DIPs 1-2-3 (see table).
The control unit is only compatible with anemometers generating 4 pulses per rev.
ACTIVE ALARM when
The measured speed is higher then
the set threshold (see the table).
Once ACTIVE ALARM
The control unit moves all the motors upward and it
doesn't execute any other command. L2 flashes.
L2 flashes
DEACTIVATED ALARM when
The sensor measures a speed lower than
the set threshold for at least 60 seconds.
12
Factory setting
ACTIVATED
DIP1 DIP2 DIP3 Km/h
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
OFF
ON
ON
ON
OFF
OFF
ON
OFF
ON
ON
ON
OFF
ON
ON
ON
40
45
50
55
60
65
70
75
Werbung
